Posts Tagged ‘title image’
BRISTOL – Zoning issues surrounding a Tupelo Street business that have been floating around for several years could finally be resolved at the next Bristol Town Council meeting. ELJ Inc. of 703 Metacom Ave. has approached the town and is looking for a zoning change for its property at 95 Tupelo St. where it runs a stone-crushing operation.
Ed Tanner, Bristol zoning official, said a zoning change from general business to manufacturing at the site will make ELJ in compliance with town regulations.
Mr. Tanner said, as of now, the business is a non-conforming use. ELJ has argued in the past that the business is grandfathered because they used the property for similar uses before zoning at the property.
“They’ve done a lot of things to their operations to try to comply with our requests and the neighbors’ complaints about noise and dust,” Mr. Tanner said.
Tags: bristol town, documents and settings, false name, image style, air pollution, brook farm, metacom, title image, clouds of dust, dust control incHere is the problem. When you use a dust suppression product like Top-Seal Dust Control, You cause the soil to become less permeable. Thus Causing the water in the lake to stay in the lake. Eventually you will Flood you Solar Farm and then it will just be a nice place to dive.
In Los Angeles, California, the city’s Department of Water and Power (DWP) is eyeing flat, dusty, arid Owens Lake as the potential site for a future mega-solar farm, but the initiative is focused less on clean, renewable solar energy than on preventing the interminable dust storms generated by the dry lake bed.
Owens Lake started to run dry when, in 1913, the city began diverting water from the Owens River. By 1926, the former lake was a shallow hardpan. Today, it ranks as the largest single source of PM10 dust (windborn dust particles smaller than 10 microns) in the United States. In fact, one estimate suggests the lake produces up to 8 million metric tons per year.
The DWP thinks that covering 616 acres of the lake bed with solar panels could cut down on dust storms, which threaten the health of nearby Keeler and Ridgecrest residents by delivering up to 23 times the amount of airborne particulate matter federal levels suggest as safe.
The plan may be a good one, since attempts to achieve dust control by flooding the lake bed have met with limited success, and flooding – at least this year – may be further hampered by a cutback to California’s 2010 water delivery, limiting the state to 5 percent of the water it has normally been allotted over the past 40-some years.
The solar project is backed by $500 million in funding, which buys a lot of solar panels, but the proposal still has to win the approval of the California State Lands Commission, largely because the DWP wants the commission to waive an environmental impact review.
Another project deterrent may be the designation, by Audubon California this year, of Owens Lake as one of the 17 most important avian sanctuaries in the state, and an emerging “wetland in the making” as bird watchers record the return of record numbers of migrating waterfowl to the partially flooded lake basin.
The DWP has promised to continue flooding at least a portion of Owens Lake to appease these environmentalists, and is in meetings with Inyo County officials, ranchers and residents to win regional support for their proposal.
The response of the former is likely to be guarded; the response of the latter looks largely promising as the state eyes renewable energy resources like solar not only as power sources but badly needed boosts to a failing economy. California is in such dire financial straits that Los Angeles recently raided its recycling initiative fund to balance the budget.
Another plus on the project side is that flooding Owens Lake sufficiently to reduce dust uses enough water to supply 60,000 households. If the DWP plan, which proposes to flood a smaller area than normal for dust control, can salvage even a third of that water, it looks like an environmental win-win.
The DWP proposes starting the solar array with a small test plot, to see if solar panels and migratory waterfowl can coexist, and if a field of solar panels can actually help prevent dust storms.
This pilot project would generate about 50 megawatts by 2012, and save 2,460 acre feet of water per year, or enough to provide for about 4,000 households practicing water conservation measures.
Tags: million metric tons, renewable solar energy, title image, bottom width, owens river
FANQUIP’S Mining Division provides mines and quarries with total conceptual planning and custom design, heavy duty products, installation of ventilation and air control systems.
Company specialists can advise on strategic air control at the development stage or integrate into plants which have been in operation for some length of time. Fanquip’s Mining Division focuses on temperature control, ventilation, management of confined space environments, dust control both in suppression and collection, and management of toxic gases and emissions.
Tags: space environments, title image, dust control inc, c documents, company specialists, quarries, png
News stories about companies converting to solar energy are becoming more and more prevalent. You see photos of solar arrays glistening in the sun, providing the clean energy that everyone covets. However, what you don’t see in the thirty second sound bite is all the work that went into getting those solar arrays sited, installed and operating.
Most people assume there are significant regulatory requirements for large utility scale projects to supply power to the grid. But even when a company is contemplating a smaller solar energy project to help power its facilities, there are many regulatory and permitting requirements that must not be overlooked in the planning of the project. Those requirements can create tremendous obstacles depending on the project’s complexity, size and location. Below are some tips on how to avoid regulatory roadblocks when implementing a solar energy system.
Tip 1: Know The Project Requirements
When planning a solar project, it is crucial to know the facility’s energy loads to determine the appropriate technology to utilize, as well as the applicable permitting requirements that might be triggered by that technology. A key initial step in any solar energy project that is often overlooked is an energy audit. Conducting an energy audit of the facility will establish a baseline for the energy needs the solar project must meet.
Tags: energy audit, bottom width, energy costs, energy loads, clean energy, conservation measures, scale projects, appropriate technology, regulatory roadblocks, image style
Whether you’re a professional or a do it yourself home remodeler, dust is a problem that occurs on most jobs. Professional remodelers know that clean up takes time, but not cleaning the area after you’re finished ruins relationships and loses clients. Do-it-yourselfers can see the face of their spouse when they mention another project. Clean up is more than just cleaning the area; it means removing dust that flies all over the house.
There are steps to reduce the amount of dust and therefore the time it takes to clean up the area. One of these is plastic, tape, staples and 2 by 4’s. Normally putting up this type of barrier is not a one-man job, if you do it alone it takes time, lots and lots of wasted time. The professional knows how important dust free construction is to the homeowner, so they take the time for two or more men to install the barrier. Most home do-it-yourselfers don’t bother, so normally projects create weeks of clean up as the dust settles throughout the house.
Now, there’s a product, which installs easily at the jobsite and blocks the dust from leaving the area. Zipwall dust control systems include telescoping poles, plastic gripping heads with pads to protect the sealing, skid free discs for under the poles, locks to seal the side and best of all, zippers. That’s right, zippers. Getting in and out of a work area that’s taped up normally means you have to overlap some of the plastic and form a loose seal at the doors, which allows the dust to escape to other parts of the house. The Zipwall system allows you to keep the seal tight, even suck the dust out as you work by putting the hose of an operating vacuum under the plastic and not have one bit of dust go to another area of the house. The professional looking enclosed area and the dust free job site is enough to get the highest praise from even your meticulous client.
Tags: c documents, home remodeler, local settings, free construction, staples, doors, man job, relationships, jobsite, locks